Emerson IS-WEB485ADPT Manuel D’Utilisation

To access the DNS menu through the Web interface:

• Click on the Configure tab, then Network Settings in the left panel and finally Edit beneath 

the table of parameters and descriptions. After making changes, click Save.

The Management Protocol Menu allows you to enable or disable 

SNMP and configure management protocols. Consult your network 

administrator for these settings.

To change any parameter:
1. Choose IP Network Settings from the Main Menu, then Management Protocol.
2. Select an option to change, then use the following guide to make changes.
Table 11

Enable or disable SNMP for remote management. 

Set up access privileges, configure the 

Web card to send traps, described in the 

next section, SNMP Communications 

Menu.
For details on viewing support information, 

see 9.2 - Events and Parameters.

Management Protocol Menu
-------------------------
1: SNMP Agent

enabled

2: SNMP Communications

<ESC>: Cancel menu level
Please select a key ?> 

Enable SNMP Agent? [y/n] ?>

SNMP Communications Menu
-------------------------
1: Authentication Traps

'no'

2: RFC-1628 (UPS) MIB

'enabled'

3: - Traps

'enabled'

4: Liebert Global Products MIB

'enabled'

5: - Condition Traps

'enabled'

6: - System Notify Tra

p

'enabled'

7: Heartbeat Trap Interval’’
8: Display/Modify Communities
9: Display/Modify Trap Communities
A: Support Information

<ESC>: Cancel menu level
Please select a key ?> 1