Emerson IS-WEB485ADPT Manuel D’Utilisation

Use the SNMP Communications Menu to enable authentication traps and view or change communi-

ties and trap communities, events and parameters. For details on viewing support information, see 

View devices that have permission to access the Web card, identified by IP address or hostname, read/

write permission and community string. Up to 20 devices may be configured for access.

Each device is identified by:

• Entry Number - use the entry number (1-20) to edit or delete an entry
• IP address or Hostname - the address of the device with access (MultiLink server, Nform 

server, Network Management System)

• Access (read/write) - read allows users to view but not change data; write allows full 

permission for configuration, control and viewing

• Community string - the community string used by the IP host for this Entry Number 

(case-sensitive, up to 32 characters)

Authentication Traps

Enables authentication traps to receive security alerts when the Web card detects 

a request with an invalid community string.

RFC-1628 (UPS) MIB

Enables the RFC-1628 (UPS specific information) MIB on the Web card for 

querying of information in that MIB. This can be enabled or disabled independently 

of the Liebert Global Products MIB.

Traps

This option enables the RFC-1628 traps to be sent when an alarm event occurs on 

the device. The parent option must be enabled for this to also be enabled.

Liebert Global Products MIB

Enables the Liebert Global Products MIB (Enterprise Specific) for querying of 

information in that MIB. This option can be enabled or disabled independently of 

the RFC-1628 MIB.

Condition Traps

Enables event condition traps to be sent per the LGP MIB. The parent option must 

be enabled for this to also be enabled.

System Notify Trap Enabled

Enables system traps to be sent per the LGP MIB. The parent option must be also 

enabled for this to be enabled.

Heartbeat Trap Interval

Specifies how often a heartbeat trap will be sent to show that the device is online 

and functioning normally.

To make changes:
Add a device (see example at right to enter all parameters in one line):

• Enter a to add an entry, then press Enter.
• Enter the IP address or hostname of the device to be added, then press 

Enter.

• Enter 1 for read or 2 for write access for this device, then press Enter.
• Enter the community string, then press Enter.

a 10.0.0.5 write public1
(then press Enter)

Communities - Example
-------------------------

1: 

10.0.0.5

write

public1

2: 

10.0.0.6

write

public1

<a>dd  <d>elete  <e>dit
Complex lines allowed. e.g. <a 198.1.1.1 write public> ?>