Emerson IS-WEB485ADPT Manuel D’Utilisation

Upgrading the firmware requires connecting to the card with one of these interfaces.

To connect to the card using terminal emulation software with a 

serial connection to the Web card:
1. Open a terminal emulation application, such as 

HyperTerminal.
To do this:

• Click  the  Start button, then Programs, Accessories, 

Communications and finally HyperTerminal. 

2. In the Connection Description window, enter a name for the 

connection—for example, GXT2U—then click OK.

3. In the Connect To window:

• Choose COM3 from the Connect Using drop-down list.
• Click OK.

4. In the COM3 Properties window, enter the communication 

settings shown in Table A3.

5. When the message at right appears in the HyperTerminal 

window, press the Enter key.

To connect to the card using terminal emulation software with 

an Ethernet connection to the Web card: 
1. Open a terminal emulation application, such as 

HyperTerminal.
To do this:

• Click  the  Start button, then Programs, Accessories, 

Communications and finally HyperTerminal. 

2. In the Connection Description window, enter a name for the 

connection—for example, GXT2U—then click OK.

3. In the Connect To window:

• Choose TCP/IP (Winsock) from the Connect Using 

drop-down list.

• Enter the IP address of the Web card—for example, 

192.168.0.125—in the Host Address box, then click OK.

4. When the message at right appears in the HyperTerminal window, 

press the Enter key.

5. Enter the Administrator username and password (both are case-

sensitive):
a. Login (username—default is Liebert)
b. Password (default is Liebert)

Baud Rate:

9600

Data Bits:

8

Parity:

None

Stop Bits:

1

Flow Control:

None

RTCS v2.96.00 Telnet server

Service Port Manager Active
<Esc> Ends Session

Login: Liebert
Password: ********