Raritan Computer EMX2-111 Manuel D’Utilisation
Chapter 10: Using the Command Line Interface
316
Orientation
Description
bottomConnector
This option indicates that the asset sensor is
mounted with the RJ-45 connector located at
the bottom.
mounted with the RJ-45 connector located at
the bottom.
Example
The following command specifies the orientation of the RJ-45 connector
on the asset sensor #1 to be on the top.
on the asset sensor #1 to be on the top.
config:#
assetStrip 1 assetStripOrientation topConnector
Rack Unit Configuration
For the Raritan asset sensor, a rack unit refers to a tag port. A rack unit
configuration command begins with rackUnit.
configuration command begins with rackUnit.
Naming a Rack Unit
This command syntax assigns or changes the name of the specified rack
unit on the specified asset sensor.
unit on the specified asset sensor.
config:#
rackUnit <n> <rack_unit> name "<name>"
Variables:
<n> is the number of the FEATURE port where the selected asset
sensor is physically connected. For the EMX device with only one
FEATURE port, the number is always 1.
sensor is physically connected. For the EMX device with only one
FEATURE port, the number is always 1.
<rack_unit> is the index number of the desired rack unit. The index
number of each rack unit is available on the Asset Strip page of the
web interface.
number of each rack unit is available on the Asset Strip page of the
web interface.
<name> is a string comprising up to 32 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.
The <name> variable must be enclosed in quotes when it contains
spaces.