Manualsbrain.com
  1. Manuels
  2. Marques
  3. RAD Data comm
  4. RIC-155
  5. Manuel D’Utilisation

RAD Data comm RIC-155 Manuel D’Utilisation

Télécharger
Page de 90
RIC-155 Installation and Operation Manual 
Chapter 4  Configuration 
 
Additional Tasks 
4-23 
The Software Version screen appears (see 
RIC-155 
SW files 
 
Software active version:        1.00 
Software active partition:      0 
Code size:                      190 
Date:                           28-02-03 
Software backup version:        0.00n00 
Software backup partition:      1 
Code size:                      0 
Date:                           0-0-0 
Boot version:                   2.20 
Boot mng version:               4.00 
 
SW Files Table 
 
ESC-prev.menu; !-main menu; &-exit 
 
Figure 4-24.  Software Version Screen 
Switching Software Versions 
If the active software becomes corrupted, you can switch it with the backup file. 
 
To switch software versions: 
1.  From the File System menu, select Swap SW Files. 
RIC-155 displays the following message:  
Request to swap SW files!!! Are you sure? Y/N  
2. Type Y to confirm the file swap. 
RIC-155 performs the swap and sends the following string: 
Program Switching 
The active software becomes backup and vice versa. At this stage, RIC-155 
is automatically reset. 
If you try to switch the software versions when only one version is available, 
RIC-155 responds with the following message: 
Impossible to switch – no other program 
Press any key to continue 
Resetting RIC-155 
RIC-155 supports two types of reset: 
•  Reset to the default setting  
 
Resetting all parameters 
 
Resetting all parameters, except for master clock and management options 
•  Overall reset of the device.