RAD Data comm RIC-155 Manuel D’Utilisation

RIC-155 Installation and Operation Manual 

Chapter 4  Configuration 

 

Additional Tasks 

4-21 

4.  From the TFTP Command menu, (see 

) select Download User File 

to start downloading file to RIC-155. 

RIC-155 automatically erases the backup partition and downloads the new 
software into the backup partition. Once the download is complete,  
RIC-155 performs a check and displays the Ended OK message. Then the 
unit resets and loads the new software to the active partition; the old active 
software is swapped into the backup partition. 

Installation of the new software releases via XMODEM is possible only via terminal 

connection. 

 

To install a new software release via XMODEM: 
1.  Follow the path: Main menu> File Utilities > SW & File Transfer > Via 

 

RIC-155 responds with the following string: 

PLEASE OPEN XMODEM APPLICATION. 
For exit press Q(uit) 
If you press <Q>, RIC-155 aborts the download process and displays  
Download failure. Press Esc to continue. in addition to the 
previous display. 

2. Send the *.img file to RIC-155 using the XMODEM protocol of your terminal 

application. 

Once the download is complete, RIC-155 displays the following message: 

After the decompression, RIC-155 is automatically reset. This causes the 
new software to be loaded into the RIC-155. 

 

 section above.