RAD Data comm IPmux-1E Manuel D’Utilisation

Appendix E Parameters and Screens

IPmux-1/1E Installation and Operation Manual

E-20

IPmux-1E ISDN Configuration

Table E-12. T1 Configuration Parameters (Cont.)

Parameter Possible

Values

Remarks

Cond. CAS first 2.5 sec
pattern

to F (ESF)

to 3 (D4)

2 or 4 Bit Code applied (during the first 2.5 seconds) to
AB(D4) or ABCD (ESF) bits (relevant in CAS mode only) when
fault conditions occur. After the first 2.5 seconds the code
specified in ‘Cond. CAS (ABCD) pattern’ is applied. ABCD
conditioning pattern can be applied toward the IP path when
loss of signal, loss of frame or AIS detected at the T1 line.
Conditioning pattern can also be applied toward the T1 line
when packet receive buffer overrun or underrun occurs.
When configuring FF to this function, this parameter is ignored
and the CAS pattern applied in the first 2.5 seconds is the
same as defined in ‘ Cond. CAS (ABCD) pattern’.
Note: This field does not appear if “unframed” is selected in
the Line Type field or if CAS Disable is selected.

Default value: FF

E.5 IPmux-1E ISDN Configuration

ISDN CONFIGURATION

1. Interfaces Mode

Terminal

2. Transmit Clock Source

Adaptive

3. Channel Configuration

ESC. Exit

Select item from the menu.

Figure E-21. ISDN Configuration Menu

Main Menu
↓

2. Configuration
↓

2. ISDN

Configuration

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610