RAD Data comm IPmux-1 Manuel D’Utilisation
Appendix E Parameters and Screens
IPmux-1/1E Installation and Operation Manual
E-28
DS0 Bundle Configuration
E.9 DS0 Bundle Configuration
This configuration selects the timeslots to be transferred end-to-end for E1/T1
when the operation mode is Fractional or Fractional with CAS. One bundle of
when the operation mode is Fractional or Fractional with CAS. One bundle of
timeslots can be configured in the IPmux-1 TDMoIP link.
DS0 BUNDLE CONFIGURATION
1. Bundle ID
1
2. Timeslot number
1-1
3. Timeslot Current Status
SET
ESC. Exit
ACTIVE TIMESLOTS IN THIS BUNDLE: 1
FREE TIMESLOTS: 2,3,4,5,6,7,8,9,10,11,12,13,14,15,17,
18,19,20,21,22,23,24,25,26,27,28,29,30,31
Select item from the menu.
Use <Esc> key or keys <1> to <3>
Figure E-28. DS0 Bundle Configuration Menu
Table E-20. DS0 Bundle Configuration Parameters
Parameter Possible
Values
Remarks
Bundle ID
1
This is the only valid option
Timeslot Number
E1:
Timeslot 0 is always invalid and
timeslot 16 is not valid for
Fractional with CAS data format.
T1: Valid timeslots are 1 to 24
Timeslot Current Status
Free
Set
Set
Frees the timeslot from the
bundle
Adds the timeslot to the bundle
bundle
Adds the timeslot to the bundle
Active timeslots in this
Bundle
Bundle
Assigned timeslots – read-only
Free Timeslots
Unassigned timeslots – read-only
➤
To save the change:
• Type <S>.
• Type <S>.
IPmux-1 will associate the new timeslot with the bundle.
Main Menu
↓
↓
2. Configuration
↓
↓
5. DS0 Bundle
Configuration
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com