Grandstream Networks GXW400x Manuel D’Utilisation
Polarity Reversal Default is No. If set to “Yes”, polarity will be reversed upon call establishment and
termination.
Hook Flash
timing
timing
Gain
Handset volume adjustment. RX is for receiving volume, TX is for transmission
volume. Default values are 0dB for both parameters. Loudest volume: +6dB
Lowest volume: -6dB.
volume. Default values are 0dB for both parameters. Loudest volume: +6dB
Lowest volume: -6dB.
Call Progress/
Ring Tones
Ring Tones
Configure ring or tone frequencies according to preference. By default tones are
set to North American frequencies. Frequencies should be configured with known
values to avoid uncomfortable high pitch sounds.
set to North American frequencies. Frequencies should be configured with known
values to avoid uncomfortable high pitch sounds.
S
AVING THE
C
ONFIGURATION
C
HANGES
Once a change is made, press the “Update” button in the Configuration Menu. The GXW–400x will
display the following screen to confirm that the changes have been saved. Reboot or power cycle the
GXW–400x after all the changes are made so that those changes can take effect.
display the following screen to confirm that the changes have been saved. Reboot or power cycle the
GXW–400x after all the changes are made so that those changes can take effect.
F
IGURE
4:
S
AVING
C
ONFIGURATION
C
HANGES
S
CREENSHOT
Grandstream Networks, Inc.
GXW-400x User Manual
Page 25 of 31
Firmware 1.0.0.17
Last Updated: 12/2006