Grandstream Networks GXW-410xv Manuel D’Utilisation

 

 
* PC client side running VLC as monitoring station 
 

Our latest official release can be downloaded from:  

Firmware (or software) upgrades can be done either via TFTP or HTTP. The corresponding configuration 
settings are on the configuration page. End users should NOT touch the configuration settings that are 
useful for ITSPs.  To upgrade your unit firmware, follow these steps: 

1.  Under Advanced Settings webpage, enter your TFTP or HTTP Server IP address (or FQDN) next 

to the “Firmware Upgrade: Upgrade Server” field.  

2.  Select via TFTP or HTTP accordingly. 

3.  If you plan to use Automatic Upgrade, set it to “Yes”, otherwise No (this will make it check for 

upgrade every time you reboot). 

To upgrade firmware via HTTP, the field “Firmware Upgrade and Provisioning: Upgrade Via” needs to be 
set to HTTP.  The “Firmware Server Path” should be set to where the firmware files are located.  
 
For example, the user can use the following URL in the Firmware Server Path: 

firmware.mycompany.com: 6688/Grandstream/1.0.0.29 

where firmware.mycompany.com is the FQDN of 

the HTTP server. It can also be in IP address format. “:6688” is the TCP port the HTTP server listening to, 
default http server listens to port 80.  “/Grandstream/1.0.0.29” is the RELATIVE directory to the root dir on 
HTTP web server.  

Grandstream Networks, Inc. 

GXW-410xv User’s Manual 

Page 22 of 30