Grandstream Networks GXW-410xv Manuel D’Utilisation

Restoring the Factory Default Setting will DELETE all configuration information of the phone. 

Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will 
not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP 
service provider. 

 
 

The ONLY way to restore default factory settings is as follows:   

1.  Unplug the Ethernet cable. 

2.  Locate a needle sized hole on the back panel of the gateway unit next to the Power connection. 

3.  Enter a needle like object in this hole and keep it pressed for about 7 seconds. 

4.  You will see the LAN port LEDs (green and orange) go off and on simultaneously; this indicates 

the reset went through. 

5.  All settings have been erased and the gateway is back to factory settings. 

Grandstream Networks, Inc. 

GXW-410xv User’s Manual 

Page 24 of 30