Quantum Audio STT3401A Manuel D’Utilisation

Page de 137
Chapter 4 
Drive operation and maintenance 
Page 20 
Seagate Travan 40 Product Manual 
Drive maintenance 
Minimal maintenance is needed to ensure that your Travan 40 drive operates at peak 
condition. This section explains how to care for tape cartridges, how to clean the 
drive head, and what to do if you experience problems with the drive. 
Caring for tape cartridges 
Although Travan tape cartridges are ruggedly built, they must be handled with care to 
preserve the data they contain. The following points are guidelines for storing and 
using minicartridges. 
• 
Do not open the tape access door of the cartridge or touch the tape itself. One 
fingerprint can prevent the drive from reading the tape. 
• 
Keep the cartridge away from sources of electromagnetic fields, such as 
telephones, dictation equipment, mechanical or printing calculators, motors, and 
bulk erasers. Do not lay cartridges on the computer monitor or on the base unit 
of the computer. 
• 
Keep the cartridge away from direct sunlight and heat sources, such as radiators 
or warm air ducts. 
• 
Keep the cartridge free of moisture. Do not wet or submerge a cartridge in any 
liquid. 
• 
Do not expose the cartridge to temperature extremes. Allow the cartridge to 
assume room temperature slowly. 
• 
Retensioning the tape cartridge is always recommended for optimal 
performance, particularly after exposure of the cartridge to temperature changes 
or shock. Retensioning restores the proper tape tension to the media. 
Cleaning the drive read/write head 
Caution.   Never clean the read/write head of the drive with anything other than a 
Seagate-approved dry-process cleaning cartridge. 
To properly maintain the tape drive, you should periodically clean the read/write 
head. No other periodic maintenance is required. 
Follow these guidelines to help ensure that your drive provides long, reliable service: 
• 
Operate the drive in a clean, dust-free environment. 
• 
Never apply a lubricant to the drive. 
• 
Generally Travan drives are highly reliable and require little user maintenance. 
For normal operations cleaning once per month is quite adequate. 
• 
For new cartridges, clean the head after two hours of tape movement. Thereafter 
the drive can be cleaned as per normal operations. 
Generally, the more severe the operating conditions (the greater the amount of dust 
or moisture in the air), the more often the drive should be cleaned. Be sure to clean