Hawking Technology HWPS1UG Manuel D’Utilisation

The  HWPS1UG  can use TCP/IP printing through the Unix lpd 
(Line Printer Daemon) protocol.  The lpd protocol is based on 

the BSD version of Unix and is supported under most versions 

of Unix.  

This chapter explains how to configure the print server for 
TCP/IP operation, and how to modify configuration files on 

your Unix system to allow printing to the print server. The 

configuration examples in this manual follow the syntax for 

BSD based Unix systems. Please refer to the related system 
documentation for the correct syntax of your system.  

To configure the print server for lpd printing, perform the 

following procedures below: 

1.  Enable the  HWPS1UG ’s TCP/IP Support.  

2.  Set the  HWPS1UG ’s IP address. 

3.   Verify the  HWPS1UG ’s IP Address. 

4.  Configure remote lpd printing on the host.  

5.  Print a test page.  

In the next section, we will describe these five procedures in 

depth.