Hawking Technology HWPS1UG Manuel D’Utilisation

The print server must have a unique IP address in order to be 
recognized by the network.  

You can set up the IP address on various Unix systems using 

any one of the following methods: 

1.   DHCP (Dynamic Host Configuration Protocol)  

2.  BOOTP (Bootstrap Protocol)  

The print server will use the last three methods to obtain its IP 

address automatically if its IP address is configured as Auto 

(0.0.0.0).  

There are many Unix systems that support the DHCP protocol 

and the procedures to configure the DHCP server database are 
different. This manual does not describe the DHCP server 

configuration on Unix systems. It is highly recommended that 

the DHCP server should be located on the same network as the 

HWPS1UG . 

If you have the BOOTP daemon, bootpd, running on your 

UNIX and is accessible to the print server, you can use the 
BOOTP protocol to set up th e IP address of the print server. 

We recommend that the BOOTP server should be located on the 

same subnet as the print server. If you use Network 

Information Services (NIS) in your system, you may need to 
rebuild the NIS map with the BOOTP services before  doing the