Honeywell DCP552 Mark II Manuel D’Utilisation

Insert a memory card, press the 

or use external switch inputs in the READY mode and the normal

display mode to load file number 1 in CH1 and CH2 on the memory card as program 1 onto the 

.

■

●

Memory card

: Program has been saved to file number 1

Variable parameter : 

set to 1

Mode

: READY mode, normal display mode

●

Insert a memory card and press the

.

The 

operates as follows.

•

“

” is displayed in display panel 1 and “

” is displayed in display

panel 1.

•

When program number 1 has been loaded onto the 

, program number

1 disappears.

•

File number 1 on a memory card is loaded onto the 

as program

number 1.

•

When a load operation is successful, the “

” and “

” indications go

off and the normal display mode appears.

Unless the number of a program is selected using external switch inputs,

program 1 in segment 1 is selected.

•

If the load operation fails, the “

” and “

” indications stay on and an

error code is displayed in the message panel.

When an error has occurred, press the 

to return to the normal display

mode.

A normal load operation cannot be performed when variable parameter

PA05 is set to 1. A normal load operation requires that parameter PA05 is

set to 0.