Manualsbrain.com
  1. Manuels
  2. Marques
  3. Honeywell
  4. DCP552 Mark II
  5. Manuel D’Utilisation

Honeywell DCP552 Mark II Manuel D’Utilisation

Télécharger
Page de 247
9  -  5
Error Message List
9-12
When an error occurs, error messages such as “
Card Error-XX
” (XX denotes error code) are displayed on the
message panel during memory card operations. The table below lists the error codes and explain their meaning.
Memory card operations are aborted when an error occurs.
To return to the normal display mode, press the 
DISP key
.
Chapter 9. MEMORY CARD OPERATIONS
Code
Meaning
Remedial measures
1
Card insertion failure or card removed
Do over.
2
Card write protect
Replace the card, or reset the protect by SLP550.
3
Card read protect
Replace the card, or reset the protect by SLP550.
4
Bad card
Replace the card.
5
Invalid card format
Initialize the card.
6
Card full
Erase unnecessary files, or initialize the card.
7
Card busy
Do over.
8
File write protect
Initialize the card.
9
Card access error
Do over.
11
Card access sequence error
Do over.
12
FAT abnormal
Initialize the card.
14
Card access sequence error
Do over.
(in file control)
15
Card battery voltage drop (warning) Replace the card, replace the card battery (If 
replaceable).
16
Wrong file version
Create new file, and create new data.
17
Data or file are missing.
Create new file, and create new data.
18
DCP552 data full (program load)
Delete unnecessary programs in the DCP552.
19
DCP552 hardware error (load error)
Do over.
20
Card data invalid
Do over.
21
Card data check sum error
Operate the instrument again, or check 
(program data)
the program setting of the DCP552.
22 to 36
Card data check sum error
Operate the instrument again, or check 
(parameter data)
the parameter setting of the DCP552.
37
Memory protect error
Set DCP552 variable parameter PA02 to 0 to 
(loading the data is protected by the cancel protection.
variable parameter PA02.)
43
No alternate areas remain on the 
Replace the card.
E
2
PROM card
44
Error occurred in writing to alternate  Replace the card.
area on E
2
PROM card
63
Card battery voltage drop (error)
Replace the card, replace the card battery (If 
replaceable).
64
File abnormal (card was removed)
Create new file, and create new data.