Mitsumi electronic NZ2GF-ETB Manuel D’Utilisation

Page de 246
188
Set the CC-Link IE Field Network gateway setting in the request source that accesses a different network address. 
(
Ethernet
IP 
Address
Configure the setting for the station on CC-Link IE Field Network, where the external device of the 
request destination is connected, so that communications reach the external device.
• Set the IP address and subnet mask pattern of the request destination in "Ethernet".
• Set the station where the IP packet transmits through last in "CC-Link IE Field Network Gateway 
Setting Station".
• Up to eight communication routes can be set.
• Pressing the 
 Enter key moves the focus.
• When setting the communication route to all the IP addresses starting with 192.160.10
• When setting the communication route to the IP address of 192.160.10.21
• Decimal input
0.0.0.1 to 
223.255.255.254
(Default: none)
• Hexadecimal input
0.0.0.1 to DF.FF.FF.FE
(Default: none)
Subnet 
Mask 
Pattern
• Decimal input
192.0.0.0 to 
255.255.255.255
(Default: none)
• Hexadecimal input
C0.0.0.0 to FF.FF.FF.FF
(Default: none)
CC-Link IE 
Field 
Network 
Gateway 
Setting 
Station
Network
No.
1 to 239
(Default: none)
Station
No.
0 to 120
(Default: none)
 
 button
These buttons are used to change the priority for communication routes set in "Ethernet" and "CC-
Link IE Field Gateway Setting Station".
CC-Link IE 
Field 
Network 
Default 
Gateway 
Setting
Network
No.
Set the station on CC-Link IE Field Network, where communications transmit through to reach the 
request destination.
This setting is used to communicate with an external device that does not exist in "Ethernet" or "CC-
Link IE Gateway Setting Station".
1 to 239
(Default: none)
Station
No.
0 to 120
(Default: none)
Item
Description
Setting range
Enter
Request
source
Request
destination
Station where the IP packet passes through last
(Network No.      , station No.      )
To transmit communications to the request destination     , 
the IP packet passes through the station with the network 
address No.       and station No.    .
Ex.
Enter 0 
in the 4th octet.
Enter a number 
in the 4th octet.