ZyXEL Communications 650 Series Manuel D’Utilisation

Page de 513
 
Prestige 650 Series User’s Guide 
Internet Access 
 
26-5 
26.6 Internet Access Configuration 
Menu 4 allows you to enter the Internet Access information in one screen.  Menu 4 is actually a simplified 
setup for one of the remote nodes that you can access in menu 11.  Before you configure your Prestige for 
Internet access, you need to collect your Internet account information.  
Use the Internet Account Information table in the Compact Guide/Read Me First/Quick Start Guide to 
record your Internet account information. Note that if you are using PPPoA or PPPoE encapsulation, then 
the only ISP information you need is a login name and password. You only need to know the Ethernet 
Encapsulation Gateway IP address if you are using ENET ENCAP encapsulation. 
From the main menu, type 4 to display Menu 4 - Internet Access Setup, as shown next.  
Figure 26-6 Menu 4 Internet Access Setup 
The following table contains instructions on how to configure your Prestige for Internet access. 
Table 26-2 Menu 4 Internet Access Setup 
FIELD DESCRIPTION 
EXAMPLE 
ISP’s Name 
Enter the name of your Internet Service Provider. This 
information is for identification purposes only. 
MyISP 
Encapsulation 
Press [
SPACE BAR
] to select the method of encapsulation 
used by your ISP.  Choices are PPPoEPPPoARFC 1483 or 
ENET ENCAP
ENET 
ENCAP 
Menu 4 - Internet Access Setup 
ISP's Name= MyISP 
Encapsulation= ENET ENCAP 
Multiplexing= LLC-based 
VPI #= 8 
VCI #= 35 
ATM QoS Type= UBR 
  Peak Cell Rate (PCR)= 0 
  Sustain Cell Rate (SCR)= 0 
  Maximum Burst Size (MBS)= 0 
My Login= N/A 
My Password= N/A 
ENET ENCAP Gateway= N/A 
IP Address Assignment= Dynamic 
  IP Address= N/A 
Network Address Translation= SUA Only 
  Address Mapping Set= N/A 
 
Press ENTER to Confirm or ESC to Cancel: