ZyXEL Communications 650 Series Manuel D’Utilisation
Prestige 650 Series User’s Guide
Wireless LAN Setup
5-13
Table 5-3 802.1x
LABEL
DESCRIPTION
Authentication
Databases
Databases
This field is activated only when you select Authentication Required in the Wireless
Port Control field.
The authentication database contains wireless station login information. The local user
database is the built-in database on the Prestige. The RADIUS is an external server.
Use this drop-down list box to select which database the Prestige should use (first) to
authenticate a wireless station.
Before you specify the priority, make sure you have set up the corresponding
database(s) correctly.
Select Local User Database Only to have the Prestige just check the built-in user
database on the Prestige for a wireless station's user name and password.
Select RADIUS Only to have the Prestige just check the user database on the
specified RADIUS server for a wireless station's user name and password.
Select Local first, then RADIUS to have the Prestige first check the user database on
the Prestige for a wireless station's user name and password. If the user name is not
found, the Prestige checks the user database on the specified RADIUS server.
Select RADIUS first, then Local to have the Prestige first check the user database on
the specified RADIUS server for a wireless station's user name and password. When
the user name is not found or password does not match in the RADIUS server, the
Prestige will not check the local user database and the authentication fails. If the
Prestige cannot reach the RADIUS server, then the Prestige checks the local user
database on the Prestige.
Port Control field.
The authentication database contains wireless station login information. The local user
database is the built-in database on the Prestige. The RADIUS is an external server.
Use this drop-down list box to select which database the Prestige should use (first) to
authenticate a wireless station.
Before you specify the priority, make sure you have set up the corresponding
database(s) correctly.
Select Local User Database Only to have the Prestige just check the built-in user
database on the Prestige for a wireless station's user name and password.
Select RADIUS Only to have the Prestige just check the user database on the
specified RADIUS server for a wireless station's user name and password.
Select Local first, then RADIUS to have the Prestige first check the user database on
the Prestige for a wireless station's user name and password. If the user name is not
found, the Prestige checks the user database on the specified RADIUS server.
Select RADIUS first, then Local to have the Prestige first check the user database on
the specified RADIUS server for a wireless station's user name and password. When
the user name is not found or password does not match in the RADIUS server, the
Prestige will not check the local user database and the authentication fails. If the
Prestige cannot reach the RADIUS server, then the Prestige checks the local user
database on the Prestige.
Back
Click Back to go to the main wireless LAN setup screen.
Apply
Click Apply to save these settings back to the Prestige.
Cancel
Click Cancel to begin configuring this screen again.
5.10 Configuring Local User Authentication
By storing user profiles locally, your Prestige is able to authenticate wireless users without interacting with a
network RADIUS server. However, there is a limit on the number of users you may authenticate in this way.
To change your Prestige’s local user database, click Wireless LAN, Local User Database. The screen
appears as shown.
network RADIUS server. However, there is a limit on the number of users you may authenticate in this way.
To change your Prestige’s local user database, click Wireless LAN, Local User Database. The screen
appears as shown.