ADC MM701G2 Manuel D’Utilisation

Chapter 7: Implementing a Point-to-Point LAN Extension

7-5

Configure the Remote LAN

1

Select LAN on the menu bar, then select LAN Setup under LAN Options to access the LAN 
Configuration page (

2

In the LAN Protocol box, confirm that the protocol is set to Bridged. 

 for procedures on using this interface to 

change the LAN protocol.

+

3

In the IP Address box, enter an available IP address on your subnet.

4

Click Apply.

 If the protocol is not set to bridged, it can be changed only through the command line 

interface.

 Any device (such as a PC) connecting to the modem LAN interface loses its connection 

when the modem LAN IP address is changed. After the IP address is changed, you need to 
specify this new address in the Web browser to reconnect a device.