ADC SG-1 Manuel D’Utilisation

4-2

Set the management card IP address, subnet mask, and default gateway (if a gateway exists) to enable 
communication with external networks and to enable access to the SG-1 CLI for Telnet sessions.

To set a new IP address and subnet mask for the SCC, do the following.

3

Press ENTER to initiate the terminal session.

4

Enter your user name at the Username: prompt.

5

Enter your password at the Password: prompt.

The system will display the Host> prompt:

Welcome to SG-1 System

Username: technician

Password: *****

Login Successful

Host>

1

From the Host(config)# prompt, enter the interface command in the following format:
interface ethernet <slot number>\<port number> <ipaddr> <netmask> mode 

2

From the Host(config)# prompt, enter the ip default-gateway command in the following format:
ip default-gateway <ipaddr>

3

For this change to become permanent, the user must perform a write memory command from the 
Host>

 first level prompt to save this change to NVRAM (when the save command is issued, it saves all 

systems parameters):
write memory