ADC SG-1 Manuel D’Utilisation

5-1

There are multiple ways to access an SG-1 for management. Also, there are rules that determine the number of 
accesses that can be made at one time to an SG-1 system. Once you have access, you can complete the 
configuration and management of the SG-1.

The operational software for an SCC resides on each individual card. The software is accessed through a 
command-line interface to configure and manage an SG-1.

The command-line interface can be accessed on an SG-1 locally through a serial interface to the Craft port on the 
SCC (or rear I/O card) or through a Telnet session as shown below. The command-line interface modifies and views 
the SG-1 Management Information Base (MIB) objects to implement system configuration and management.

Additionally, SG-1 can also be configured and managed through a customer-provided Element Management 
System (EMS). The EMS uses SNMP to modify and view the SG-1 MIB objects.

In addition to logging on to an SG-1 locally through the Craft port, up to four additional remote users can log on 
through a Telnet session.

The following example shows how to access the SG-1 CLI using a Telnet session from a remote system. Specify the 
IP address previously designated for this purpose:

You receive a Welcome prompt when you successfully log on to the SG-1 CLI. Log on with the user account 
information assigned to you.

To log off, enter the exit command at the first level Host> prompt.

Welcome to SG-1 System

Username: technician

Password: *****

Host>

 The CLI Inactivity Timer automatically logs the current user off the system if the keyboard remains 

inactive for five minutes.