ADC SG-1 Manuel D’Utilisation

7-17

[loopback]

Places a logical loopback on the bridge-route interface.

<loopback number>

Numeric value assigned to the bridge-route loopback.

[mtu]

Used to set the interface's Maximum Transmission Unit (MTU) (valid values are 1500 or 1544).

Example(s)

This command enables PPPoA negotiation for a specific interface within the system.

Usage

pppoa enable interface <slot number>\<port number\[sub-interface number]>

Before enabling PPPoA, you must configure the correct port and the ATM interface.

Parameter(s)

Example(s)

Host(config)# interface atm 2 \ 1 \ 1 type bridge-route point-to-point ip 

192.168.10.1 255.255.255.0 mtu 1544

Added item

Host(config)#

<slot>

Slot number.

1 - 2

<port number>

Physical port number.

1 - 2

<sub-interface number>

Sub-interface number.

1- 2000

Host(config)# pppoa enable interface 0 \ 1