ADC Campus-REX RS Interface Card Manuel D’Utilisation
Configuring and Monitoring through the LCD
Campus-REX RS Interface Card User Manual
4-9
Configuring the Alarm
To enable or disable the local Loss of Signal alarm:
1
From the
CURRENT ALARMS
display, press Next twice.
LOCAL I/F
ALARMS CONFIG & STATUS
displays.
2
Press Enter. The current status of the local alarm displays.
3
Press Next.
LOC LOSS OF SIG ALM
displays.
4
Press Enter.
5
Press Next to scroll through the settings for the alarm.
6
Press Enter to select the desired setting.
LOC LOSS OF SIG ALM
displays.
Remote Alarms
Loss of Signal (LOS) alarms can occur on the remote unit. This section
describes how to view and configure this alarm.
describes how to view and configure this alarm.
Viewing Current Alarms
If the
CURRENT ALARMS
display indicates a remote alarm, you can
determine the alarm type:
1
From the
CURRENT ALARMS
display, press Next three times.
RMT I/F
ALARMS CONFIG & STATUS
displays.
2
Press Enter. The current status of the remote alarm displays.
CAD1069i5.book Page 9 Thursday, May 30, 2002 7:32 AM