ADC Campus-REX RS Interface Card Manuel D’Utilisation
Configuring and Monitoring through the LCD
4-8
Campus-REX RS Interface Card User Manual
Viewing Current Alarms
1
From the
CURRENT ALARMS
display, press Next until
HDSL LINK ALARMS
displays.
2
Press Enter until the current HDSL alarm status displays.
3
Press Next until
AUTOSYNC:
displays.
4
If the AutoSync alarm is on or acknowledged, press Enter for more
information.
information.
Configuring the Alarm
1
From the
CURRENT ALARMS
display, press Next until
HDSL LINK ALARMS
displays.
2
Press Enter until the current HDSL alarm status displays.
3
Press Next until
AUTOSYNC CFG ALM
displays.
4
Press Enter.
5
Press Next to scroll through the settings for the AutoSync alarm until the
desired setting displays.
desired setting displays.
6
Press Enter to select the desired setting.
AUTOSYNC CFG ALM
displays.
Local Alarms
Loss of Signal (LOS) alarms can occur on the local unit. This section
describes how to view and configure this alarm.
describes how to view and configure this alarm.
Viewing Current Alarms
If the
CURRENT ALARMS
display indicates a local alarm, you can determine
the alarm type:
1
From the
CURRENT ALARMS
display, press Next twice.
LOCAL I/F
ALARMS CONFIG & STATUS
displays.
2
Press Enter. The current status of the local alarm displays.
CAD1069i5.book Page 8 Thursday, May 30, 2002 7:32 AM