ADC Campus-REX RS Interface Card Manuel D’Utilisation
Configuring with an ASCII Terminal
5-10
Campus-REX RS Interface Card User Manual
C
ONFIGURING
S
TARTUP
P
ARAMETERS
The Campus-REX can take its startup information from its internal NVRAM
or from a network server. For more information about downloading startup
information from a network, see
or from a network server. For more information about downloading startup
information from a network, see
.
Set the Boot Mode option to one of the following:
•
Local sets the Campus-REX to receive its protocol and network
configuration from internal memory.
configuration from internal memory.
•
Network sets the Campus-REX to receive its startup data from a network
server.
server.
1
From the Main Menu, type
then press
. The Data Port Settings
menu displays.
Set the Boot Mode only when the Campus-REX is set as a
bridge. The Boot Mode setting has no effect when the
Campus-REX is in router mode.
bridge. The Boot Mode setting has no effect when the
Campus-REX is in router mode.
2
ENTER
Dec 9, 1999
ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx
13:16:44
Local Unit ID:
Campus-REX Unit #34
Local I/F:
REX
Remote Unit ID: Campus-REX Unit #12
Remote I/F: REX
Circuit ID:
Network Extension Circuit 5001
DATA PORT SETTINGS
MAC ADDRESS:
00:20:A7:21:2F:6B
10 BASE-T STATUS:
Up
1)
BRIDGE/ROUTER CONFIGURATION
2)
SNMP CONFIGURATION
3)
WRITE NVRAM
4)
RESET INTERFACE CARD
WARNING:
NVRAM must be written and interface card reset for any
configuration changes to take effect.
(R)eturn
ENTER CHOICE>
CAD1069i5.book Page 10 Thursday, May 30, 2002 7:32 AM