Adtran L128T Manuel D’Utilisation
Chapter 3: Terminal Menu Operation and Structure
68
Express L128/L128T User Manual
61202.070L1-1
Route/IP/Net
Write security: 3; Read security: 5
The PPP peer’s IP address or network can be set here, if known. Leaving this
at 0.0.0.0 means that the Express L128/L128T will determine the PPP peer’s IP
and network using the PPP IPCP.
The PPP peer’s IP address or network can be set here, if known. Leaving this
at 0.0.0.0 means that the Express L128/L128T will determine the PPP peer’s IP
and network using the PPP IPCP.
Route/Netmask
Write security: 3; Read security: 5
This network mask is applied to the IP/NET address for determining the PPP
peer’s network. If left as 0.0.0.0, a standard network mask is used.
This network mask is applied to the IP/NET address for determining the PPP
peer’s network. If left as 0.0.0.0, a standard network mask is used.
Route/Static Route
Write security: 3; Read security: 5
When set to Yes (def), the Express L128/L128T will add the network defined
above as an idle route in the IP routing table. When an IP packet is routed to
this idle route, the Express L128/L128T will dial using this profile. When set
to No, an idle route is not placed in the table. This is necessary for dial-on-de-
mand applications and if the probe feature is not used.
When set to Yes (def), the Express L128/L128T will add the network defined
above as an idle route in the IP routing table. When an IP packet is routed to
this idle route, the Express L128/L128T will dial using this profile. When set
to No, an idle route is not placed in the table. This is necessary for dial-on-de-
mand applications and if the probe feature is not used.
Route/Private
Write security: 3; Read security: 5
When set to Yes, the Express L128/L128T will not advertise this static route
entry. A setting of No (def) means any static route added for this profile is ad-
vertised using RIP.
When set to Yes, the Express L128/L128T will not advertise this static route
entry. A setting of No (def) means any static route added for this profile is ad-
vertised using RIP.
Route/Hops
Write security: 3; Read security: 5
This value is the metric or number of hops that RIP will use in advertising the
static route. The range is 1 to 16 where 1 is the default. The value 16 is consid-
ered an infinite distance in RIP and is, in effect, poisoning the route.
This value is the metric or number of hops that RIP will use in advertising the
static route. The range is 1 to 16 where 1 is the default. The value 16 is consid-
ered an infinite distance in RIP and is, in effect, poisoning the route.
Route/Force IP
Write security: 3; Read security: 5
When set to Yes, the Express L128/L128T will force the PPP peer to use the IP
address in the IP/Net for this profile as its WAN IP address. Normally this is
set in the No (def) position.
When set to Yes, the Express L128/L128T will force the PPP peer to use the IP
address in the IP/Net for this profile as its WAN IP address. Normally this is
set in the No (def) position.