Adtran L128T Manual Do Utilizador

Chapter 3: Terminal Menu Operation and Structure

Express L128/L128T User Manual

61202.070L1-1

Write security: 3; Read security: 5
The PPP peer’s IP address or network can be set here, if known.  Leaving this 
at 0.0.0.0 means that the Express L128/L128T will determine the PPP peer’s IP 
and network using the PPP IPCP.

Write security: 3; Read security: 5
This network mask is applied to the IP/NET address for determining the PPP 
peer’s network.  If left as 0.0.0.0, a standard network mask is used.

Write security: 3; Read security: 5
When set to Yes (def), the Express L128/L128T will add the network defined 
above as an idle route in the IP routing table.  When an IP packet is routed to 
this idle route, the Express L128/L128T will dial using this profile.  When set 
to No, an idle route is not placed in the table. This is necessary for dial-on-de-
mand applications and if the probe feature is not used.

Write security: 3; Read security: 5
When set to Yes, the Express L128/L128T will not advertise this static route 
entry.  A setting of No (def) means any static route added for this profile is ad-
vertised using RIP.

Write security: 3; Read security: 5
This value is the metric or number of hops that RIP will use in advertising the 
static route.  The range is 1 to 16 where 1 is the default.  The value 16 is consid-
ered an infinite distance in RIP and is, in effect, poisoning the route.

Write security: 3; Read security: 5
When set to Yes, the Express L128/L128T will force the PPP peer to use the IP 
address in the IP/Net for this profile as its WAN IP address. Normally this is 
set in the No (def) position.