Adtran 1700601G2 Manuel D’Utilisation
Unit Installation
NetVanta 3100 Series Hardware Installation Guide
24
Copyright © 2012 ADTRAN, Inc.
61700600L2-34A
Supplying Power to the Unit
The NetVanta 3100 Series comes equipped with a 12 VDC power supply for connecting to the proper
power receptacles.
power receptacles.
Figure 10. NetVanta 3100 Series Power Connector
Your NetVanta unit is now ready to be configured and connected to the network. For information on
configuration for a specific application, refer to the configuration guides provided on the
configuration for a specific application, refer to the configuration guides provided on the
ADTRAN Support
Community
. For details on the command line interface (CLI), refer to the
AOS Command Reference Guide
. All
other related documents are also available online at
http://supportforums.adtran.com
.
Instructions for Powering the NetVanta 3100 Series
Step
Action
1
To insert the 12 VDC power connector, pull the outer sheath back from the metal connector, as
shown in
shown in
.
2
Insert the connector into the receptacle (labeled POWER) on the back of the unit keeping the
sheath retracted until the connector is fully inserted into the receptacle.
sheath retracted until the connector is fully inserted into the receptacle.
3
Release the sheath so that it covers the metal connector. This ensures that the connector will
not become disengaged during use.
not become disengaged during use.