MicroNet Technology SP5052 Manuel D’Utilisation
35
-nscng
silence suppression and comfort noise generation setting (1 =
ON; 0 = OFF). It is applicable to G.723 codec only. An example
is demonstrated below:
ON; 0 = OFF). It is applicable to G.723 codec only. An example
is demonstrated below:
usr/config$ voice -nscng g723 1
-mindelay
the minimum jitter buffer size. (Default value= 90 ms)
-maxdelay the minimum jitter buffer size. (Default value= 150 ms)
usr/config$ voice –mindelay 90 –maxdelay 150 -optfacor 7
-echo
activate each canceller (1 = ON; 0 = OFF).
Note:
Be sure to know well the application before you change voice parameters
because this might cause incompatibility.
Be sure to know well the application before you change voice parameters
because this might cause incompatibility.
5.17 [tos] command
TOS service allows users to achieve QoS on IP network.
usr/config$ tos
IP Packet ToS(type of Service)information and configuration
Usage:
tos [-rtptype precedence]
[-rtpdelay
mode]
[-rtpthruput
mode]
[-rtpreliab
mode]
tos -print
[-sigtype]|[-rtptype]|[-rtcptype]
[-sigtype]|[-rtptype]|[-rtcptype]
0
routine.
1 priority.
2 immediate.
3 flash.
4 flash override.
5 critic.
6 internet control.
7 network control.
[-sigdelay]|[-rtpdelay]|[-rtcpdelay]
0
normal
delay.
1 low delay.
[-sigthruput]|[-rtpthruput]|[-rtcpthruput] 0 normal throughput.
1 high throughput.
[-sigreliab]|[-rtpreliab]|[-rtcpreliab] 0 normal reliability.
1
high
reliability.
Example:
tos -rtptype 7 -rtpdelay 0 -rtpthruput 0 -rtpreliab 0
Parameter Usages:
-print
display current TOS values configurations.
-sigtype
configure TOS type of signaling packets from 0 to 7