Nlynx ZWA-G120 Manuel D’Utilisation

 

28

These settings are only for more technically advanced users who have sufficient 

knowledge about wireless LAN. These settings should not be changed unless 

you know what effect the changes will have on your device. The default setting is 

optimized for the normal operation. For specific application, setting configuration 

will required highly attention to reach optimistic condition. 

Note： 

Any unreasonable value change to default setting will reduce the 
throughput of the device. 

 

The device supports two Authentication Types “Open system” and “Shared 

Key”. When you select “Share Key”, you need to setup “WEP” key in “Security” 

page (See the next section). The default setting is “Auto”. The wireless client 

can associate with the device by using one of the two types. 

The fragmentation threshold determines the size at which packets are 

fragmented (sent as several pieces instead of as one block). Use a low setting 

in areas where communication is poor or where there is a great deal of radio 

interference. This function will help you to improve the network performance. 

The RTS threshold determines the packet size at which the radio issues a 

request to send (RTS) before sending the packet. A low RTS Threshold setting