Nlynx ZWA-G120 Manuel D’Utilisation

 

29

can be useful in areas where many client devices are associating with the 

device, or in areas where the clients are far apart and can detect only the 

device and not each other. You can enter a setting ranging from 0 to 2347 

bytes. 

The standard IEEE 802.11b/11g supports 1, 2, 5.5, 11 / 6, 9, 12, 18, 24, 36, 48 

and 54 Mbps data rates. You can choose the rate that the device uses for data 

transmission. The default value is “auto”. The device will use the highest 

possible selected transmission rate. 

The beacon interval is the amount of time between access point beacons in 

mini-seconds. The default beacon interval is 100. 

Broadcasting the SSID will let your wireless clients find the device 

automatically. If you are building a public Wireless Network, disable this 

function can provide better security. Every wireless stations located within the 

coverage of the device must connect this device by manually configure the 

SSID in your client settings. 

This function will let Wireless Stations roam among a network environment 

with multiple devices. Wireless Stations are able to switch from one device to 

another as they move between the coverage areas. Users can have more 

wireless working range. An example as the following figure 

You should comply with the following instructions to roam among the wireless 

coverage areas. 

Note：  For implementing the roaming function, the setting MUST comply the 

following two items. 
z 

All the devices must be in the same subnet network and the SSID must 
be the same. 

z 

If you use the 802.1x authentication, you need to have the user profile 
in these devices for the roaming station.

 

 

Ethernet

Wireless Station moves 

between the coverage areas

DEV1

DEV2