3com 3C13759 Manuel D’Utilisation

3Com Router 5000 and Router 6000 v2.41 
Module Guide

 

Chapter 4  Flexible Interface Cards (Router 6000)

 

4-67 

Table 4-45 Interface attributes of the Router NDEC2 Encryption Accelerator FIC   

Protocol supported   

IPsec 

Hardware algorithm   

key algorithm (DES, 3DES, AES) 

Authentication algorithm (HMAC-MD5-96, HMAC-SHA-1-96)   

 

The following figure illustrates the Router NDEC2 Encryption Accelerator FIC panel: 

 

Figure 4-66 Router NDEC2 Encryption Accelerator FIC panel 

The following table describes the LEDs on the Router NDEC2 Encryption Accelerator 
FIC panel. 

Table 4-46 LEDs on the Router NDEC2 Encryption Accelerator FIC   

STATUS 

Solid green: Power is being supplied to the Router NDEC2 Encryption 
Accelerator FIC normally.   

OFF: The card is not powered, the power supply of the card has failed or a 
serious hardware fault occurs. 

ACTIVE 

OFF after two-second flashing (yellow): The card finishes initialization. 

Blinking: The card operates normally and data is being transmitted or 
received.  

OFF: The card is operating normally but not sending or receiving data.   

 

You may learn how well the encryption card is operating by reading the LEDs on it. 

For the correct LED behaviors, refer to Table 4-46.