Sony NSP-100 Manuel D’Utilisation

NSP 100

Op
er

at

io

n

System Administrator Setup

19

Normally, it is recommended to select “Position 
Adjustment” first, and position the top left corner of 
the screen, then proceed to size adjustment.

Adjust the screen position or size.
• If you have selected “Position,” using the v, V, b 

and B buttons, adjust the position of the screen 
horizontally and vertically. The coordinates are 
shown in parenthesis.

• If you have selected “Size,” use the v and V 

buttons to adjust the screen height, and the  b and 
B buttons to adjust the screen width. The 
dimensions in pixels are shown in parenthesis.

To cancel the adjustment and exit the menu 
screen
Press the MENU button.

Press the ENTER button.

The adjusted values are set and the screen to select 
the item to be adjusted reappears.

As required to adjust the other item, repeat steps 

 

to 

.

When the adjustments are complete, press the v 
button to select “Set,” then press the ENTER 
button.

The adjustments are reflected in the screen display.

To carry out system administrator setup, display the 
“System Administrator Setup” screen.

To display the “System Administrator Setup” screen, in 
the “Setup” screen, carry out any of the following 
operations.
• Press numeric button 7, then press the ENTER button.
• Using  the  v and V buttons, select “7. System 

Administrator Setup,” and press the ENTER button.

A password entry window appears.

In this case, enter the password with the numeric 
buttons, and press the ENTER button.

The “System Administrator Setup” screen appears.

Carry out any of the following operations.
• Press numeric button 1.
• Using the v and V buttons, select “1. Back to Setup,” 

and press the ENTER button.