Emerson Network Router Manuel D’Utilisation
Installation and Use Manual
29
Installation and Setup
Pr
oL
in
oL
in
k II
Setup
T
ransmitter Star
tup
Usi
n
g
Pr
oL
in
oL
in
k
II
Be
fo
fo
re
Y
Y
o
u
Begin
5. If you are making a service port connection to a Model 1500/2500 transmitter or a Series 3000
transmitter:
a.
Power down the transmitter.
b.
Restore power to the transmitter.
c.
Wait 1–5 seconds. On the Series 3000, wait until the display begins to flash.
6. Click the
Connect
button. ProLink II will attempt to make the connection.
7. If an error message appears, see Section 2.4.
2.2.7
Obtain and configure a site key
To obtain and configure a site key:
1. Open the License Request file as follows:
Start > Programs > MMI > ProLink II v2.5 > ProLink II License Request Form
2. Edit the file, supplying all requested information including the site code.
The site code is provided in the
License
window (see Figure 2-13). The
License
window can
be opened from the ProLink II
File
menu.
Note: To minimize the possibility of error, Micro Motion recommends copying and pasting the site
code, rather than typing the value.
code, rather than typing the value.
3. Save the edited file.
4. Contact Micro Motion in one of the following ways:
•
Send an email to:
ProLink.Support@EmersonProcess.com
and attach the edited file to the email. The file is named
LicenseRequest.txt
, and in
typical installations is located in
Program Files > MMI > ProLink II v2.5
.
Note: This is the default location. If the ProLink II installation program found an existing license file,
the program and License Request file were installed in the location of the license file.
the program and License Request file were installed in the location of the license file.
•
Telephone 800-522-6277 (toll-free in the U.S.), or 303-530-8350 (worldwide), and request
a site key. Have the edited registration text file available for reference.
a site key. Have the edited registration text file available for reference.
Note: To minimize the possibility of error, Micro Motion recommends using the email method.
5. When the site key is provided:
a.
Start ProLink II.
b.
From the
File
menu, click
License
. The window shown in Figure 2-13 is displayed.