Grandstream Networks GXW40XX Manuel D’Utilisation
Grandstream Networks, Inc.
GXW40XX User Manual
Page 20 of 38
Firmware 1.0.4.2
Last Updated: 06/2011
Preferred VOCODER (Codec)
The GXW40XX supports a broad range of voice codecs. Under Profile web pages, choose your preferred
order of different codecs:
order of different codecs:
• PCMU/A (or G711µ/a)
• G729 A/B/E
• G723
• G726 (16/24/32/40)
• iLBC
• AAL2 (all G726)
• G729 A/B/E
• G723
• G726 (16/24/32/40)
• iLBC
• AAL2 (all G726)
D
EFINITIONS
This section will describe the options in the Web configuration user interface. As mentioned, a user can
log in as an administrator or end-user.
Functions available for the end-user are:
log in as an administrator or end-user.
Functions available for the end-user are:
• STATUS: Displays the network status, account status, software version and MAC-address of the
phone
• BASIC SETTINGS: Basic preferences such as date and time settings, multi-purpose keys and
LCD settings can be set here.
Additional functions available to administrators are:
• ADVANCED SETTINGS: To set advanced network settings, codec settings and XML
configuration settings.
• PROFILE X: To configure each of the SIP accounts.
• FXS PORTS
• FXS PORTS
: To configure each of the FXS ports and Hunting Groups etc.
T
ABLE
7:
B
ASIC
S
ETTINGS
End User Password
Password to access the Web Configuration Menu. This field is case sensitive with a
maximum length of 25 characters.
maximum length of 25 characters.
Web Port
By default, HTTP uses port 80. This field is for customizable web port.
Telnet Server
Default is Yes.
IP Address
There are two modes to operate the GXW40XX :
DHCP mode: The GXW40XX acquires its IP address from the first DHCP server it
discovers from the LAN It is on.
PPoE: Set the PPPoE account settings. The GXW40XX will establish a PPPoE
session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP
address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are
set to zero by default.
DHCP mode: The GXW40XX acquires its IP address from the first DHCP server it
discovers from the LAN It is on.
PPoE: Set the PPPoE account settings. The GXW40XX will establish a PPPoE
session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP
address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields are
set to zero by default.