Grandstream Networks GXW40XX Manuel D’Utilisation
Grandstream Networks, Inc.
GXW40XX User Manual
Page 21 of 38
Firmware 1.0.4.2
Last Updated: 06/2011
DHCP hostname
This option specifies the name of the client. This field is optional but may be
required by some Internet Service Providers. Default is blank.
required by some Internet Service Providers. Default is blank.
DHCP domain
This option specifies the domain name that client should use when resolving
hostnames via the Domain Name System. Default is blank.
hostnames via the Domain Name System. Default is blank.
DHCP vendor class ID
Used by clients and servers to exchange vendor-specific information. Default is
HT500.
HT500.
PPPoE account ID
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point
Protocol over Ethernet) connection.
Protocol over Ethernet) connection.
PPPoE password
PPPoE account password.
PPPoE Service Name
This field is optional. If your ISP uses a service name for the PPPoE connection,
enter the service name here. Default is blank.
enter the service name here. Default is blank.
Time Zone
Controls how the date/time is displayed according to the specified time zone.
Self Defined Time Zone
The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
It indicates a time zone with 6 hours offset with 1 hour ahead which is the US
central time.
It is positive (+) if the local time zone is west of the Prime Meridian and negative
(-) if it is east.
Prime Meridian (International or Greenwich Meridian)
M3.2.0,M11.1.0
The 1st number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd
Tuesday etc)
The 3rd number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of
March to the 1st Sunday of November.
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
It indicates a time zone with 6 hours offset with 1 hour ahead which is the US
central time.
It is positive (+) if the local time zone is west of the Prime Meridian and negative
(-) if it is east.
Prime Meridian (International or Greenwich Meridian)
M3.2.0,M11.1.0
The 1st number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd
Tuesday etc)
The 3rd number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of
March to the 1st Sunday of November.
Language
Default is English. Languages supported with voice prompt.
Device Mode
This parameter controls whether the device is working in NAT router mode or Bridge
mode. Save the setting and reboot prior to configuring the GXW.
Note: This option is not present on GXW4024
mode. Save the setting and reboot prior to configuring the GXW.
Note: This option is not present on GXW4024
NAT maximum ports
Maximum NAT ports, typically one connection per port.
Note: This option is not present on GXW4024
Note: This option is not present on GXW4024
NAT TCP timeout
NAT TCP timeout in seconds
Note: This option is not present on GXW4024
Note: This option is not present on GXW4024
NAT UDP timeout
NAT UDP timeout in seconds.
Note: This option is not present on GXW4024
Note: This option is not present on GXW4024
Uplink Bandwidth
ISP specified WAN uplink bandwidth
Note: This option is not present on GXW4024
Note: This option is not present on GXW4024
Downlink Bandwidth
ISP specified WAN downlink bandwidth
Note: This option is not present on GXW4024
Note: This option is not present on GXW4024
Enable UPnP support
If set to “Yes”, the GXW40XX would act as an UPnP gateway for your UPnP enable
applications. UPnP - Universal Plug n Play
Note: This option is not present on GXW4024
applications. UPnP - Universal Plug n Play
Note: This option is not present on GXW4024