Intellinet Network Solutions 524957 Manuel D’Utilisation

4

HARDWARE INSTALLATION

Using the included RJ45 Ethernet cable (and more, as needed), make 

your 4-Port Broadband Router network connections by following the 

steps below and referring to the Port and LED descriptions (presented 

from left to right).

1.  Turn off all devices to be incorporated into the network, including  

  any PCs, switches/hubs, the modem and the router.

2.  Connect the LAN or Ethernet network port of the cable/DSL modem 

  to the router’s WAN port.

3.  Connect PCs (and any switch/hub used to expand the network) to 

  the router’s LAN ports.

4.  Turn on the cable/DSL modem.

5.  Use the included power adapter to connect the router to an AC  

 outlet. 

6.  Turn on the PC you’ll be using to configure the router.

WAN — This 10/100Mbps port connects the cable/DSL modem.

PC1-4 — These four LAN ports connect networked devices, such as  

  PCs, print servers and remote hard drives. If you connect a LAN  

  port to a switch or hub, check that both the device’s Power LED  

  and the router’s corresponding PC/LAN LED (see below) light to  

  confirm the connection.  

Reset — Push this recessed button to clear all established router  

  configuration settings and reset to the factory default settings. See 

  Section 3: Restore Defaults. 

PWR — This jack is for the included external 9 V DC, 500 mA power  

 adapter.

PWR

PC2

PC3

PC4

Reset

WAN

PC1