Intellinet Network Solutions 524957 Manuel D’Utilisation

5

NETWORK SETTINGS

PWR — This lights when the router is turned on. 

4-1 — These correspond to the four LAN ports on the router’s rear  

  panel. Lighted indicates a successful connection; blinking means  

  data is being transmitted or received through that port.

WAN — Lighted indicates a successful Internet connection; blinking  

  indicates data is being transmitted or received through that port.

To configure the router using a Web browser-based configuration utility, 

at least one properly configured computer needs to be connected to 

the router via the Ethernet. This 4-Port Broadband Router is configured 

with the default IP address of 192.168.2.1 and subnet mask of 

255.255.255.0, and its DHCP server is enabled by default. 

2.1.1  Windows 98SE / Me
1.  On your PC’s desktop, click “Start” and go to the Control Panel.

2.  Double-click the “Network” icon to display the Network dialog box.

3.  Click the Configuration tab and ensure that you have the  

  appropriate network card installed.

4.  Select “TCP/IP.” NOTE: If “TCP/IP” is listed more than once, select  

At this point, you can proceed to Section 2.3: Logging In to the Web 

Browser. If you encounter problems from there, return here and follow 

the steps in Sections 2.1: IP Address Setup and 2.2: Confirming the 

Connection.