Huawei DR814Q Manuel D’Utilisation

Page de 84
User Manual 
Aolynk DR814Q ADSL2+ Broadband Router 
11  Appendix – Glossary
 
78 
XXXIII. RJ-45 
The 8-pin connector used for connecting Ethernet switches, hubs and routers. 
Straight-through cables are usually the connector of this type. 
XXXIV. Routing 
Forwarding data between the local network and the Internet through the most efficient 
path, based on the data’s destination IP address and current network conditions. A 
device that performs routing is called a router. 
XXXV. SNMP 
Simple network management protocol (SNMP), a network management standard, is 
widely used in the TCP/IP network. SNMP provides a way to manage the network 
nodes from the host located in the center of the network, such as the server, work 
station, router, bridge, and hub. It usually performs the management through the 
distributed structure administration and proxy. 
XXXVI. TCP/IP 
Transmission control protocol/internet protocol. 
It defines a suite of the basic protocols, not just the TCP/IP protocol, for the network 
communication. 
XXXVII. Telnet 
An interactive, character-based program used to access a remote computer. The HTTP 
and FTP only allow you to download files from a remote computer, while Telnet allows 
you to log into and use a computer from a remote location. 
XXXVIII. Twisted pair 
A common copper cable used for the telephony application. It contains one or more 
cable pairs twisted together to minimize the interference and the noise. In an Ethernet 
LAN, category 3 cable is used for the 10Base-T network while the category 5 cable, the 
higher level, is used for the 100Base-T network. 
XXXIX. Upstream 
The upstream flows from users to the Internet.  
XL. USB 
Universal serial bus. A serial interface that attaches the devices such as printers and 
scanners to the computer. The DR814Q provides a USB port to connect a host. 
XLI. VC 
Virtual circuit. A connection from the DSL router to the ISP.