Proxim AP-2000 Manuel D’Utilisation

144

Proxim recommends changing your default passwords immediately. To perform this operation using CLI 
commands, refer to 

.

There are a few basic configuration parameters that you may want to setup right away when you receive the AP. For 
example:

–

–

–

–

–

–

–

–

–

[Device-Name]>set sysname <system name> sysloc <Unit Location>
[Device-Name]>set sysctname <Contact Name (person responsible for system)>
[Device-Name]>set sysctphone <Contact Phone Number> sysctemail <Contact E-mail address>
[Device-Name]>show system

The IP Subnet Mask of the AP must match your network’s Subnet Mask.

[Device-Name]>set ipaddrtype static 
[Device-Name]>set ipaddr <fixed IP address of unit>
[Device-Name]>set ipsubmask <IP Mask>
[Device-Name]>set ipgw <gateway IP address>
[Device-Name]>show network

[Device-Name]>passwd <Old Password> <New Password> <Confirm Password> (CLI password)
[Device-Name]>set httppasswd <New Password> (HTTP interface password)
[Device-Name]>set snmprpasswd <New Password> (SNMP read password)
[Device-Name]>set snmprwpasswd <New Password> (SNMP read/write)
[Device-Name]>set snmpv3authpasswd <New Password> (SNMPv3 authentication password)