Proxim AP-2000 Manuel D’Utilisation
16
2
Getting Started
•
•
•
•
•
•
•
Prerequisites
Before installing an AP, you need to gather certain network information. The following section identifies the information
you need.
you need.
NOTE
Passwords must be configured with at least 6 characters in length.
Network Name (SSID of the wireless cards)
You must assign the Access Point a Primary Network Name before wireless users can
communicate with it. The clients also need the same Network Name. This is not the same
as the System Name, which applies only to the Access Point. The network administrator
typically provides the Network Name.
communicate with it. The clients also need the same Network Name. This is not the same
as the System Name, which applies only to the Access Point. The network administrator
typically provides the Network Name.
AP’s IP Address
If you do not have a DHCP server on your network, then you need to assign the
Access Point an IP address that is valid on your network.
Access Point an IP address that is valid on your network.
HTTP Password
Each Access Point requires a read/write password to access the web interface. The default
password is “public”.
password is “public”.
CLI Password
Each Access Point requires a read/write password to access the CLI interface. The default
password is “public”.
password is “public”.
SNMP Read Password
Each Access Point requires a password to allow get requests from an SNMP manager.
The default password is “public”.
The default password is “public”.
SNMP Read-Write Password
Each Access Point requires a password to allow get and set requests from an SNMP
manager. The default password is “public”. This password must be at least 6 characters in
length.
manager. The default password is “public”. This password must be at least 6 characters in
length.
SNMPv3 Authentication Password
If Secure Management is enabled, each Access Point requires a password for sending
authenticated SNMPv3 messages. The default password is “public”.
The default SNMPv3 username is administrator, with SHA authentication, and DES
privacy protocol.
authenticated SNMPv3 messages. The default password is “public”.
The default SNMPv3 username is administrator, with SHA authentication, and DES
privacy protocol.
SNMPv3 Privacy Password
If Secure Management is enabled, each Access Point requires a password when sending
encrypted SNMPv3 data. The default password is “public”.
encrypted SNMPv3 data. The default password is “public”.
Security Settings
You need to determine what security features you will enable on the Access Point.
Authentication Method
A primary authentication server may be configured; a backup authentication server is
optional. The network administrator typically provides this information.
optional. The network administrator typically provides this information.
Authentication Server Shared Secret
This is a password shared between the Access Point and the RADIUS authentication
server (so both passwords must be the same), and is typically provided by the network
administrator.
server (so both passwords must be the same), and is typically provided by the network
administrator.
Authentication Server Authentication Port
This is a port number (default is 1812) and is typically provided by the network
administrator.
administrator.
Client IP Address Pool Allocation Scheme
The Access Point can automatically provide IP addresses to clients as they sign on. The
network administrator typically provides the IP Pool range.
network administrator typically provides the IP Pool range.
DNS Server IP Address
The network administrator typically provides this IP Address.