Proxim AP-2000 Manuel D’Utilisation
69
Performing Advanced Configuration
Alarms
This tab has three sub-tabs.
–
–
–
–
Groups
The AP can be configured to generate and send alarms/notifications/traps as version 1 or a version 2c. Use the
drop-down menu to select SNMP alarm type.
There are seven alarm groups that can be enabled or disabled via the Web interface. Place a check mark in the box
provided to enable a specific group. Remove the check mark from the box to disable the alarms. Alarm
drop-down menu to select SNMP alarm type.
There are seven alarm groups that can be enabled or disabled via the Web interface. Place a check mark in the box
provided to enable a specific group. Remove the check mark from the box to disable the alarms. Alarm
vary.
Figure 4-17 Syslog Configuration Screen
•
Configuration Trap Group
Trap Name
Description
DNS IP Address not Configured
oriTrapDNSIPNotConfigured
RADIUS Authentication not Configured
oriTrapRADIUSAuthenticationNotConfigured
RADIUS Accounting not Configured
oriTrapRADIUSAccountingNotConfigured
Duplicate IP Address Encountered
oriTrapDuplicateIPAddressEncountered
VLAN ID Invalid Configuration
oriTrapVLANIDInvalidConfiguration
Auto Configuration Failure
oriTrapAutoConfigFailure
CLI Configuration Execution Failure
oriTrapBatchExecFailure
CLI Configuration Execution Start
oriTrapBatchFileExecStart
CLI Configuration Execution End
oriTrapBatchFileExecEnd