RAD Data comm ASMi-52 Manuel D’Utilisation
Appendix C Easy Config Device
Installation and Operation Manual
C-2 Installation
ASMi-52 Ver. 2.5
C.3 Installation
Package Contents
The Easy Config package contains the following items:
• Easy Config device
• AC/DC power adapter
• Interface cable with DB-9 male and female connectors.
• Easy Config device
• AC/DC power adapter
• Interface cable with DB-9 male and female connectors.
Connecting the Interface Cable
The control port of the Easy Config terminates in a D-type 9-pin male connector.
To connect the Easy Config to ASMi-52:
1. Connect the female connector of the supplied interface cable to the Easy
1. Connect the female connector of the supplied interface cable to the Easy
Config port designated CONSOLE.
2. Connect the male connector of the interface cable to the ASMi-52 port
designated CONTROL.
Connecting the Power
Power is supplied to the Easy Config via an external AC/DC power supply or via
four AA non-rechargeable batteries.
four AA non-rechargeable batteries.
To reduce the risk of electric shock and fire, use only AC/DC power adapters
supplied with the unit.
supplied with the unit.
To connect the external power adapter:
1. Push the external power adapter plug into the round DC socket designated
1. Push the external power adapter plug into the round DC socket designated
5V, 1A DC.
2. Connect the external AC/DC power adapter to the mains outlet.
To insert batteries:
1. Loosen the four screws on the back cover of the Easy Config.
2. Remove the back cover by lifting it straight up.
3. Insert four AA non-rechargeable batteries into the battery compartment.
4. Replace the back cover by reversing the procedure described in steps 1–2.
1. Loosen the four screws on the back cover of the Easy Config.
2. Remove the back cover by lifting it straight up.
3. Insert four AA non-rechargeable batteries into the battery compartment.
4. Replace the back cover by reversing the procedure described in steps 1–2.
Warning