RAD Data comm ASMi-52 Manuel D’Utilisation

Installation and Operation Manual

Appendix C Easy Config Device

ASMi-52 Ver. 2.5

Operation C-3

C.4 Operation

Turning the Easy Config On

To turn the Easy Config on:
• Set the top panel BAT switch to OFF if the Easy Config receives power from

the external AC/DC adapter.
or

• Set the top panel BAT switch to ON if the Easy Config receives power from the

AA batteries.

Do not leave the Easy Config in the battery-fed mode if not in use. This drains
power from the batteries. The dead batteries may leak, damaging the unit.

Front Panel Controls

Figure C-1

illustrates the Easy Config unit and designates its main components.

Table C-1

describes functions of the front panel controls.

Table C-1. Front Panel Controls

Name Function

ENTER

Inputs data and confirms the changes made in the ASMi-52 operation

(Scroll Down)

Scrolls the display down the LCD

(Scroll Right)

Scrolls the display horizontally across the LCD

ESC (Escape)

Exits to the previous menu

Working with the Easy Config

Once the Easy Config is powered up and connected to ASMi-52, it can be used for
managing the modem.

To start the Easy Config control session:
• Immediately after the power-up press the ESC button when PASSWORD is

displayed on the LCD.

The ASMi-52 main menu is displayed.

• If 10-minute security timeout is enabled for ASMi-52 (Configuration > System

Configuration > Control Port > Port Control > Terminal > Security Timeout),
and no user activity has been detected for this period of time, the modem
terminates the control session. In this case the Easy Config has to be powered
down and powered up again to re-initiate the session.

• The Easy Config has be powered down and powered up again if it stops

responding to the user input.

Caution

Note