RAD Data comm ASMi-52 Manuel D’Utilisation
Installation and Operation Manual
Appendix C Easy Config Device
ASMi-52 Ver. 2.5
Operation C-5
5. Repeat steps 3–4 to complete the selection.
Use the s character as a space
Use the ESC button to delete the last entered character.
6. Press the ENTER button to accept selected values.
7. If an invalid value is entered, Error Reconfigure
message is displayed
on the LCD.
Press the ESC button to return to the previous menu.
8. When it is necessary to confirm or cancel the selected action (for example,
when resetting the unit), follow steps 3–4 to choose y or n from the available
character list and press the ENTER button to accept the selection.
character list and press the ENTER button to accept the selection.
For example:
To assign 111.222.33.44 IP address to the ASMi-52 host via the Easy Config:
1. Move the cursor to the Host IP Address menu (Configuration > System
1. Move the cursor to the Host IP Address menu (Configuration > System
Configuration > Management > Host IP).
2. Press the ENTER button.
The following display appears:
enter –.–.–.–.–.–
3. Hold down the z button, and press the x button several times.
Display scrolls through the available characters and numbers in the top row
of the LCD.
of the LCD.
0
4. Keep on holding the z button, until the desired value is displayed, then press
the x button to select the value.
The selected value is displayed in the bottom row of the LCD.
1
1
1
5. Press the x button two more times to complete the first portion of the host IP
address.
1
111
111
6. Hold down the z button, until s is displayed in the top row.
s
111
111