RAD Data comm ASMi-52 Manuel D’Utilisation

Installation and Operation Manual 

Chapter 4  Configuration 

ASMi-52 Ver. 2.5 

Configuring ASMi-52 for Management 

4-5 

ASMi-52 units with an E1 or T1 port support management via a dedicated 
timeslot.  
A remote E1 device can be managed via DTS if the DTS mode is enabled in both 
the CO unit and the CPE unit. The MNG timeslot is transferred over the SHDSL to 
the E1 CPE, the CPE forwards the MNG timeslot over the E1 line to the next 
device in the chain. 

• 

 

 

In T1 systems, the DTS manages the local unit only; it is not forwarded over SHDSL. 

 

To configure dedicated timeslots: 
1. From the DTS Configuration menu (Main menu > Configuration > System 

Configuration > Management > DTS Configuration), configure the dedicated 
timeslot in the following order (see 

): 

 

Assign a DTS IP address 

 

Assign a DTS IP mask 

 

Enable the DTS mode. 

2.  Check the status of the DTS configuration in the Rem Agent Table (see 

). 

3.  From the Management menu, select Save to save the changes. 

In the Map Timeslot menu (

), the dedicated timeslot value 

changes to MNG (management).