RAD Data comm ASMi-52 Manuel D’Utilisation
Installation and Operation Manual
Chapter 4 Configuration
ASMi-52 Ver. 2.5
Additional Tasks
4-45
ASMi-52
SW files
Local
Remote
Software active version:
(2.01E24)
(2.02000)
Software active partition:
(0)
(0)
Code size:
(813110)
(813161)
Date: (28-7-4)
(2-8-4)
Software backup version:
(2.01E24)
(2.01E11)
Software backup partition:
(1)
(1)
Code size:
(813110)
(809233)
Date: (28-7-24)
(9-6-4)
Boot version:
(1.10)
(1.10)
Boot mng version:
(5.34)
(5.34)
Press any key to continue...
ESC-prev. menu; !-main menu; &-exit
Figure 4-48. Software Version Screen
Switching the Software Versions
If an active software becomes corrupted, you can switch it with the backup in the
local ASMi-52 units.
local ASMi-52 units.
To swap software versions:
1. From the File System menu, select the SWAP Local SW Files (Main menu >
1. From the File System menu, select the SWAP Local SW Files (Main menu >
File Utilities > File System > Swap Local SW Files) to swap files in the local
ASMi-52.
ASMi-52.
ASMi-52 displays the following message:
Request to swap SW files!!! Confirm Y/N
Request to swap SW files!!! Confirm Y/N
2. Type Y to confirm the file swap.
ASMi-52 performs the swap and sends the following string:
Program Switching
The active software becomes the backup and vice versa. At this stage,
ASMi-52 is automatically reset.
Program Switching
The active software becomes the backup and vice versa. At this stage,
ASMi-52 is automatically reset.
If you try to switch the software versions when only one version is available,
ASMi-52 responds with the following message:
Impossible to switch – no other program
Press any key to continue
ASMi-52 responds with the following message:
Impossible to switch – no other program
Press any key to continue
Resetting ASMi-52
ASMi-52 supports four types of reset:
• Reset to the default setting
• SHDSL interface reset
• SHDSL repeater line reset
• Overall reset.
• Reset to the default setting
• SHDSL interface reset
• SHDSL repeater line reset
• Overall reset.