Manualsbrain.com
  1. Manuels
  2. Marques
  3. RAD Data comm
  4. MBE10-8D
  5. Manuel D’Utilisation

RAD Data comm MBE10-8D Manuel D’Utilisation

Télécharger
Page de 58
Chapter 2  Installation 
MBE Family Installation and Operation Manual 
2-2 
Installation and Setup
 
 
2.3 Package Contents 
The following items are included in the MBE product packaging: 
•  One MBE standalone unit 
•  Control cable with RJ-45 connector – CBL-RJ45/D9/F/6FT 
•  AC power cord 
•  MBE Family Installation and Operation Manual 
•  LAN RANger Series Configuration Guide. 
2.4 Equipment Needed 
The following equipment is required to install the MBE: 
•  ASCII terminal or PC terminal emulator 
•  CBL-RJ45/D9/F/6FT control cable with RJ-45 connector (supplied with the 
device) for connection to the configuration terminal. 
2.5  Installation and Setup 
MBE is a standalone unit intended for tabletop or bench installation. It is delivered 
completely assembled. No provision is made for bolting the unit on the tabletop. 
 
To install the MBE unit: 
1.  Determine the required configuration of MBE and set the internal jumpers 
accordingly. 
2.  Connect the line (see 
). 
3.  Connect the LAN (see 
). 
4.  Connect power to the unit (see 
). 
 
Access to the inside of the equipment is permitted only to authorized and 
qualified personnel. 
To avoid accidental electric shock, always disconnect the interface cables and 
power cord before removing the unit from its casing. 
Any adjustment, maintenance or repair of the opened instrument under 
voltage must be avoided as much as possible, and when inevitable, should be 
carried out only by a skilled technician who is aware of the hazards involved. 
 
 
 
Warning 
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com