Cabletron Systems 2.2 Manuel D’Utilisation
WAN Applications
4-10
Displaying the WAN Logical View
Displaying the WAN Logical View
The WAN Logical View window displays information about the logical interfaces
that comprise your physical WAN port. Although the WAN Logical View
window has identical Þelds for the T1 and the Synchronous ports, the number of
interface entries depends on the type of port. The Synchronous port will have a
single interface entry; the T1 port will have 24 interface entries.
that comprise your physical WAN port. Although the WAN Logical View
window has identical Þelds for the T1 and the Synchronous ports, the number of
interface entries depends on the type of port. The Synchronous port will have a
single interface entry; the T1 port will have 24 interface entries.
To open the WAN Logical View window:
1.
Click on Device in the Chassis View menu bar to access the Device menu.
2.
Click on WAN Status and Logical View. The WAN Logical View window,
Figure 4-5. The WAN Logical View Window (T1)
The WAN Logical View window displays the following Þelds:
IF
Displays the interface index; a unique value for each logical interface supported
by this device.
by this device.
Protocol
Displays the active Link Layer protocol: PPP (Point to Point), Frame Relay, LEX,
or None.
or None.
Compression
Display if data compression is On or Off. Data compression is not supported by
the WAN BRIM at this time; compression will always be de-activated or Off.
the WAN BRIM at this time; compression will always be de-activated or Off.